1000bph-15000nph automatic carbonated 3 in 1 filling machine\
Introduction
1. Rinser
Spring cramps are used in the bottle washing process. The empty bottles can be turned over 180° Along the conveying rail. There are two times of internal and external washing, the efficiency of bottle washing is high.Bottle clip equipped with efficient spray on nozzle. The extrusive droplet with 15° Angle ensures to wash all side of the bottle, and can save the water.
2. Filler
The design of filling structure is reasonable and hygiene dead angle, the run of equipment is stable, it can control the material from the bottleneck, the control accuracy is within ± 2mm (subject to bottle design). The filling valve material is SUS304. The filling system has liquid level automatic control. Filling valve lift is controlled by the valve elevator, after filling valve contact the bottleneck, it start to fill. Bottle is conveying by the wheel in the filling part.
3. Capper
Screw capping machine is most precision part in the 3-1 machine, it has a big influence to the goods stability and defective rate. Our screw capping has following feature.
Features present are as under
1. Adopts the negative pressure filling which we specifically design for CSD filling, it ensures minimal loss of CO2 from the product
2. The configuration of filler is advanced, pithy and rational and the driving and up-down transmission is located between the stainless steel working plat and the bracket and their waterproof is good, sanitary and credible and adjusting and maintaining are very easy.
3. We design the filling valves on basis of foreign advanced technique for adapting high-speed hot filling. It can ensure the valves open and close flexibly because of using guide sheath. Adopting easy-fixed configuration, the valve is easy to cleaning promptly and has automatic cleaning function.
4. The filling operation is faster and more stable because the new type micro pressure filling system is adopted.
5. The electropneumatic filling valves are equipped with interchangeable level tubes to make the best precision filling, and the filling level for the bottle is adjust.
Main equipments as below:
1. Water treatment system (quartz sand filter, active carbon filter, softner, RO system and so on)
2. Ozone generator sterilizer
3. Aseptic water storage tank
4. Sugar melting tank & syrup filter
5. Flavour blending tank & syrup cooler
6. Co2 drink mixer & Co2 filter
7. Water chiller
8. Auto bottle washing, filling and capping line
9. Labeling machine
10. Date of manufacture printer
11. Final products film packaging machine and so on.
Technical Parameters
| model: |
DGF18-18-6 |
DGF24-24-8 |
DGF32-32-10 |
DGF40-40-10 |
DGF50-50-12 |
| capacity (500ml based) |
6000BPH |
8000BPH |
12000BPH |
15000BPH |
18000BPH |
| Suitable bottle: |
PET bottle or Glass bottle |
| PET bottle: (mm) |
(Bottle Diameter): φ50-φ110mm (Height): 150-310mm |
| Suitable cap specification |
Plastic screw cap |
| Filling precision: |
≤±5mm |
| Filling pressure:(Mpa) |
≤0.4MPa |
| Machine power |
5.18 |
6.58 |
8.18 |
9.2 |
10.1 |
| Machine size:(mm) |
2100*1500*2250 |
2230*1830*2250 |
2600*2200*2250 |
2900*2200*2250 |
3880*2200*2500 |
| Weight: (kg) |
2800 |
3000 |
4200 |
6000 |
8000
|
Our Services
Pre- sales Phase:
1.We have sales representative to communicate with our client to understand client needs and based on our experience, capacity to initiate the draft proposal for our client review.
2With the proposal review, analysis and improvement, we will finalize our proposal with our clients.
Production Phase:
1.We have very strong filing machine business experience and downstream/upstream partnership.
2.Under the criteria of customized quality, our good production scheduling will make sure our client filling machine will be delivered in time.
After-sales Phase
1 2 years warranty for the whole system
2.equipment installation and debugging
3.we can provide internship service and help you train the operator and mechanic
4.we can help you to design the product line,workshop and provide turn-key project.
5.24 hours technical support by email
Company Information
1.We're the professional manufacture for various kinds of beverage equipment.
As mineral water pure water filling machine
pure water filling line .juice making machine .
carbonated drink cola , glass bottle beer filler machine,
Alumium cola/beer can, and etc.
All our products with Certificate: CE approved.SGS approved
2. Application field :
(1). The three functions of bottle washing, filing and capping are composed
in one body of the machine . (2). The whole process is automatic . (3). So this machine has three steps ,the first is washing, the second is filling,
the third is sealing the bottle .
3. Features:(1) Low power consumption, better material SUS 304, SUS 316. (2) Small size,simple structure,low investment (3) Auto complete line, need less worker .
4. Project design:
We can design any project of the completer line to meet the demands of our clients, considering both factory
When you send an inquiry, please let us have the output and the shape of the bottle and the volume of the bottle so that we can recommend the right machine for you.
If you have any special needs, we can also design the products according to your requirements.
Audited Supplier 
){kind=link}
){kind=link}