Semi Automatic Food Grade Craft Beer Filling Small Aluminum Can Glass Bottle Depalletizer Filling and Seaming Machine

• Customization: Available
• After-sales Service: Overseas Engineer Provided
• Warranty: 2 Year
• Model NO.: XDJ-01
• Packaging Material: Film
• Packaging: Bottles
• Driven Type: Electric
• Type: Beverage Production Line
• Function: Can Depalletizer
• Application: Drinks, Dairy Products, Cosmetics
• Soft and Hardness: Flexible Package
• Circulation Function: Outer Packing
• Frequency of Use: Packing
• Mode of Operation: Special Product Packaging
• Speed: 10000-20000 Cans Per Hour
• Voltage: Customized
• Power: 10kw
• Size: 4500*2000*4200mm
• Weight: 4000kgs
• Transport Package: Film Packing
• Specification: ky-10000
• Trademark: KEYUAN
• Origin: China
• HS Code: 8422303090
• Production Capacity: 15000bph
• Package Size: 450.00cm * 220.00cm * 420.00cm
• Package Gross Weight: 3500.000kg

Product Description

Product Description

High level bulk can depalletizer are mechanical machine that unload (depalletize) packaged empty cans or glass bottles from the pallet. The depalletizer allows the transfer of products and materials from pallets without the use of human personnel, saving the time, money and effort.
 

Advantages

1. High performing2. Reliable
3. Flexible (in terms of container, format and pallet)
4. Quick and easy format changeover
5. Completely automated
6. Fully customizable
7. High operator safety standards

Appliance scope

For various metal cans, glass bottles, plastic bottles for layered depalletizing.

Depalletizer workflow and principles

1. Forklift put the whole stack cans/bottles into unstacking station (hydraulic lift table)2. Chain lifter will transit the packed pallet to the upper most of the depalletizer.
3. Four sides clamps will hold the uppermost whole layer cans or bottles from four sides, moving in parallel to the outlet multi lane conveyor.
4. The the four sides cylinder clamps will back to original position.
5. Pneumatic absorb hands will absorb the next layer top side isolate pad, move the pad to pad collector.
6. Chain lifter, hold the board rise to a certain height crib.
7. Do the same procedure until the last layer, hydraulic lifts pallet fell to bottom, then transit to empty pallets stacker.
8. Forklift remove the empty pallet.
 

Product Parameters

Power	3.75Kw
Voltage	Standard Voltage- 200-240V AC 50/60Hz, 30 AMP ,Single OR Three Phase, OR 380-480V AC 50/60Hz, 30 AMP, Three Phase
Air Supply	145PSI = 1Mpa
Production Speed	Customised from 25CPM to 400CPM according to specific order.
Air Consumption	1CFM
Conveyor	Multiple options available, according to required speed and cans
Operation System	Siemens PLC with Touch screen
Loading	Low-Profile pallet jack
Weight	1800Kg
Size	6000*2300*3400MM
Working Type	Semi Automatic and Fully Automatic

Details Of Machines

Walking Platform and Stairway

The operator can walk on platform to operate and checking the machine working situation.

Pallet Chain Lifting System

When the pallet arrived at lifting station then it will be lifted to the top platform.

 

Can Feeding Platform

When pallet at the top side then the pusher will push all empty cans into the feeding conveyor.

 

Empty Can Photoelectric Detection

The sensor is used to detect the cans are blocked or not. When reflector receives the signal from the sensor then the pusher will pushing the next layer cans into the platform conveyor. When reflector can't receives signal from the sensor then the pusher will not pushing the extra cans into the platform conveyor.

 

Inline Can Washing Machine and Long Twist Cage

The empty cans will be cleaned by this can rinser through overturning the position before into the filling process.

 

Relevant Machines

Drinking Water Treatment Equipment

Process: Spring-raw water booster pump, mechanical filter, precision filter, active carbon filter, sodium exchanger, RO machine/hollow fiber ultrafiltration device, Store tank, UV sterilizer, ozone generator and other equipment.
It can effectively get rid of muddy organic, iron, manganese and oxide, filter suspended substance, colloid, remained oxygen of micro-organism and some of height-metal ion in the water. This water treatment equipment can also reduce hardness of water to make it all specifications of the water quality fully meet the state fresh water standards, even that of standard of mineral water,

Bottle Blowing Machine

Automatic PET Bottle Blowing Machine is suitable for blowing PET bottles of various shapes, volume from 100 ml to 2000 ml, wide application for blowing mineral water bottles, soda bottles,cola bottles.
Advantages
1.New double crank four pull-up bar clamping structure, cross balance fixed slide.
2.Sealing, stretch adapts parallel bars (CIS) design, combined, good for products molding.
3.Programmable PLC controller automatically control, microcomputer touch screen convenient operation.
4.Bottle embryo heated by infrared, controllable constant pressure control, so as to achieve the best blowing precision.

Hot Melt Glue Labeling Machine

This hot melt glue plastic bottle label applicator is widely suitable for different material of container and label. The label cost is comparatively lower, it can meet the requirements of those users who have diverse kinds of the containers. It is the most economical models in cost to make mass production and intergrated operating. The equipment has massively used modularization design concept to make it easy and simple for users to change the bottles.

Laser Date Printer

This machine combines advanced laser galvanometer marking technology, imported RF excitation and sealed CO2 laser and real-time marking software control technology. It uses laser marking technology on the production line to mark and mark fast moving products. The writing is permanently erasable and can meet the needs of various production lines. It is suitable for online marking of paper, plastic, non-metallic materials and painted metal packaging materials.

Automatic shrink wrap packing machine

Automatic shrink wrap packing machine In the packaging machinery industry, the film wrapping machine is the abbreviation of the wrapping film packaging machine,
sometimes called the winding machine and the wrapping machine.

Cap injection molding machine

It also known as injection molding machine or injection machine. It is the main forming equipment for plastic products which are made of thermoplastic or thermosetting plastic by using plastic molding mould. Divided into vertical,horizontal, all electric.The plastic injection molding function heats the plastic, and exerts high pressure on the molten plastic, so that the injection molding cavity is filled with the mold cavity.

 

Our Service

                                    Factory Design                                                                                Product Design

          Provide OEM Factory Design According to your facotry                          Design your dreamed final products

Before Sales

1.Answer your any question on us with in 24 hours.
2.Supply all information you required.
3.Help building reasonable factory
4.Machines video for reference.
5.Welcome to visit factory.

After Sales

1.Update production progress each week.
2.Sending machines pictures on production .
3.Machines testing running over 8 hours, and sending testing videos.4.engineer arranged to install machines.
5.Spare Parts provided.

Parts Of Successful Project

Beverage Mixing System

Capacity:3000L/H

All the equipments are customized by tech requirements.

 

5 Gallon Water Production Line

Capacity:1200 Barrels/Hour

Complete 5 Gallon recycled Barrel water production line.

Carbonated Juice Packing Plant

Capacity:20000BPH

Carbonated juice pet bottle filling plant.

Pure Water Treatment System

Capacity:20000L/H

Designed according to raw water quality.

 

KeYuan Clients

 

FAQ

1.Q:Are you a factory or trading company?

A:We are a factory, professional water treatment equipment manufacturer and small bottle water production line with about 10 years experience. Factory covers an area of 6000 square. There have been more than 30 countries use our products.

2.Q:Where is your factory located? How can I visit there?
A:Our factory is located in sanxing yucai road.Jinfeng town,zhangjiagang city,jiangsu province,china. about 2 hours away from podong Airport .we will pick you up in the nearest station. All our clients, from home or abroad, are warmly welcome to visit us !

3.Q:How long is the warranty of your equipment?
A:2 years warranty after receipt check upon delivery.And we will comprehensively provide you all kinds of technical
support services in after-sale !

4.Q:What is the features of our company?
A: We provide turnkey project for customers, including pre-sale and after-sale service; complete production line equipment
supply;bottle design; layout programs provide; or provide auxiliary materials purchasing agent supplier information; equipment overseas installation and commissioning; operator training;etc

Give me the basic information about you want:
1.what kind products will you produce: water, juice, with gas or others.
2.what is your capacity you want: that how many bottles per hour you want
3.what kind of the bottle: pet bottle or glass bottle; bottle volume; bottle sharp. bestly give me the bottle picture.
4.the single machine or the whole line.

So that I can make suitable proposal for you.