The water treatment facilities is pre-treating the tap water in the raw water container and desalting in the anti-penetration system to get pure water. The pre-treatment device consists of mechanical filter, reactive carbon filter, natrium ion exchanger and precise filter. The core parts of the anti-penetration system has applied world famous water pump of "glanf" from Denmark and the anti-penetration RO films made by Haidenen Co.of U.S.A..The full set of film washing device is affiliated. The structure is simple, the operation is convenient, the technical level is high. This system is the most ideal drinkable water production facility in China.
The water treatment facilities contains multi-medium filter, active carbon filter, sodium-ion exchanger, precision filter, ozone generator, hollow fibre filter, RO system, etc, This system can be changed according to the customers request use for Mineral water production line,Purified water production line ,juice production line , carbonated beverage production line etc. The design is scientific and reasonable. Its appearance is beautiful. Its operation and maintenance is convenient.
Name |
Model |
Output(T/H) |
Power(kw) |
Salt-removal rate(%) |
Diameter(mm) |
Overall dimensions(mm) |
Weight(kg) |
Hyperfilration device |
FST-01D |
1.0 |
4.4 |
>99.5 |
DN32 |
1600*600*1700 |
1500 |
Hyperfilration device |
FST-02D |
2.0 |
7.0 |
>99.5 |
DN32 |
3800*900*1800 |
1800 |
Hyperfilration device |
FST-03D |
3.0 |
8.0 |
>99.5 |
DN40 |
3800*1200*1700 |
2500 |
Hyperfilration device |
FST-06D |
6.0 |
18.5 |
>99.5 |
DN45 |
4800*1250*1750 |
3200 |
Working Flow
Raw water tank and raw water pump
Raw water tank is used for storing raw water, used to precipitate large sediment particles and other sedimentable substances in the water. At the same time, the impact of unstable water pressure in the raw water pipe on the water treatment system is buffered. (Such as pressure sensor response caused by too low or too high water pressure)Raw water pump is used to stabilize the water supply pressure of the system and stabilize the water supply.
Silica sand filter + Active carbon filter + Sodium ion exchanger
Silica sand filter is a filter material that uses quartz sand as a filler. Conducive to removing impurities in the water. It also has the advantages of low filtration resistance, large specific surface area, strong acid and alkali resistance, and good pollution resistance.
Active carbon filter uses a nutshell activated carbon filter, which can not only adsorb electrolyte ions, but also perform ion exchange adsorption.
Sodium ion exchanger or softener is an ion exchanger used to remove calcium ions and magnesium ions from water to prepare softened water.
Reverse Osmosis System
The device's key part is reverse osmosis membranes that is from the America, it has a good performance to eliminate salts and the high pressure pump is from a high quality pump producer in China, it's easy to handle for its simple structure. The source water,in the case that the conductivity is less than 500us/CM, can reach the national standards totally after treatment by this device,it's the most ideal equipment for water treatment.
The RO membrane can effectively remove calcium, magnesium, bacteria, organic matter, inorganic matter, metal ions and radioactive substances in the water. The crystal clear, sweet and glycoly purified by this device.
Finished water tank
This is the last step of water treatment system,the water thar treated is stored in this water tank.
Parameter :stainless steel 304
thickness :2.8mm
Size: Diameter of tank 1950*2700
Total height :3180mm
Drinking Water Treatment Equipment
Process: Spring-raw water booster pump, mechanical filter, precision filter, active carbon filter, sodium exchanger, RO machine/hollow fiber ultrafiltration device, Store tank, UV sterilizer, ozone generator and other equipment.
It can effectively get rid of muddy organic, iron, manganese and oxide, filter suspended substance, colloid, remained oxygen of micro-organism and some of height-metal ion in the water. This water treatment equipment can also reduce hardness of water to make it all specifications of the water quality fully meet the state fresh water standards, even that of standard of mineral water,
Bottle Blowing Machine
Automatic PET Bottle Blowing Machine is suitable for blowing PET bottles of various shapes, volume from 100 ml to 2000 ml, wide application for blowing mineral water bottles, soda bottles,cola bottles.
Advantages
1.New double crank four pull-up bar clamping structure, cross balance fixed slide.
2.Sealing, stretch adapts parallel bars (CIS) design, combined, good for products molding.
3.Programmable PLC controller automatically control, microcomputer touch screen convenient operation.
4.Bottle embryo heated by infrared, controllable constant pressure control, so as to achieve the best blowing precision.
Hot Melt Glue Labeling Machine
This hot melt glue plastic bottle label applicator is widely suitable for different material of container and label. The label cost is comparatively lower, it can meet the requirements of those users who have diverse kinds of the containers. It is the most economical models in cost to make mass production and intergrated operating. The equipment has massively used modularization design concept to make it easy and simple for users to change the bottles.
Laser Date Printer
This machine combines advanced laser galvanometer marking technology, imported RF excitation and sealed CO2 laser and real-time marking software control technology. It uses laser marking technology on the production line to mark and mark fast moving products. The writing is permanently erasable and can meet the needs of various production lines. It is suitable for online marking of paper, plastic, non-metallic materials and painted metal packaging materials.
Automatic shrink wrap packing machine
Automatic shrink wrap packing machine In the packaging machinery industry, the film wrapping machine is the abbreviation of the wrapping film packaging machine,
sometimes called the winding machine and the wrapping machine.
Cap injection molding machine
It also known as injection molding machine or injection machine. It is the main forming equipment for plastic products which are made of thermoplastic or thermosetting plastic by using plastic molding mould. Divided into vertical,horizontal, all electric.The plastic injection molding function heats the plastic, and exerts high pressure on the molten plastic, so that the injection molding cavity is filled with the mold cavity.
Factory Design Product Design
Provide OEM Factory Design According to your facotry Design your dreamed final products
Before Sales
1.Answer your any question on us with in 24 hours.
2.Supply all information you required.
3.Help building reasonable factory
4.Machines video for reference.
5.Welcome to visit factory.
After Sales
1.Update production progress each week.
2.Sending machines pictures on production .
3.Machines testing running over 8 hours, and sending testing videos.4.engineer arranged to install machines.
5.Spare Parts provided.
Parts Of Successful Project
Beverage Mixing System
Capacity:3000L/H
All the equipments are customized by tech requirements.
5 Gallon Water Production Line
Capacity:1200 Barrels/Hour
Complete 5 Gallon recycled Barrel water production line.
Carbonated Juice Packing Plant
Capacity:20000BPH
Carbonated juice pet bottle filling plant.
Pure Water Treatment System
Capacity:20000L/H
Designed according to raw water quality.
1.Q:Are you a factory or trading company?
A:We are a factory, professional water treatment equipment manufacturer and small bottle water production line with about 10 years experience. Factory covers an area of 6000 square. There have been more than 30 countries use our products.
2.Q:Where is your factory located? How can I visit there?
A:Our factory is located in sanxing yucai road.Jinfeng town,zhangjiagang city,jiangsu province,china. about 2 hours away from podong Airport .we will pick you up in the nearest station. All our clients, from home or abroad, are warmly welcome to visit us !
3.Q:How long is the warranty of your equipment?
A:2 years warranty after receipt check upon delivery.And we will comprehensively provide you all kinds of technical
support services in after-sale !
4.Q:What is the features of our company?
A: We provide turnkey project for customers, including pre-sale and after-sale service; complete production line equipment
supply;bottle design; layout programs provide; or provide auxiliary materials purchasing agent supplier information; equipment overseas installation and commissioning; operator training;etc
Give me the basic information about you want:
1.what kind products will you produce: water, juice, with gas or others.
2.what is your capacity you want: that how many bottles per hour you want
3.what kind of the bottle: pet bottle or glass bottle; bottle volume; bottle sharp. bestly give me the bottle picture.
4.the single machine or the whole line.
So that I can make suitable proposal for you.